Husqvarna TC 250 2012 Bedienungsanleitung Seite 57

ENGINE OIL REPLACEMENT AND BAG FILTERS-FILTER
CARTRIDGE CLEANING OR REPLACEMENT
WARNING*: Be careful not to touch hot en-
gine oil.
Drain the oil with WARM ENGINE; proceed as follows:
•
remove oil filler cap (2);
•
remove the engine lower guard (A);
• place an oil drain pan under the engine block;
•
Remove the oil drain cap (3), the mesh filter (4) and drain
the old oil;
•
Clean the mesh filter with benzine;
•
in order to replace the filter cartridge (5), unscrew the three
fastening screws then the filter cartridge cover (6).
Once the oil filters have been cleaned-replaced, fit the parts
back in, in the opposite sequence to the disassembly, and pour
in the prescribed amount of oil, as listed in the LUBRICATION
TABLE.
3
A
4
6
SPECIFICATIONS - OPERATION - MAINTENANCE
5
EN - 15