Herunterladen Diese Seite drucken

Dell EMC PowerEdge R940xa Handbuch Seite 3

Rack-server
Vorschau ausblenden Andere Handbücher für EMC PowerEdge R940xa:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

CAUTION: Never remove the heat sink from a processor unless you
intend to replace the processor. The heat sink is necessary to maintain
proper thermal conditions.
WARNING: The heat sink may be hot to touch for some time after the
system has been powered down. Allow the heat sink to cool before
removing it.
1. Place the processor in the processor tray.
NOTE: Ensure that the pin 1 indicator on the processor tray is aligned
with the pin 1 indicator on the processor.
2. Flex the outer edges of the bracket around the processor ensuring that the
processor is locked into the clips on the bracket on the processor.
NOTE: Ensure that the pin 1 indicator on the bracket is aligned with
the pin 1 indicator on the processor before placing the bracket on the
processor.
NOTE: Ensure that the processor and the bracket are placed in the tray
before you install the heat sink.
3. If you are using an existing heat sink, remove the thermal grease from the
heat sink by using a clean linen free cloth.
4. Use the thermal grease syringe included with your processor kit to apply the
grease in a quadrilateral design on the top of the processor.
WARNING: Applying too much thermal grease can result in excess
grease coming in contact with and contaminating the processor socket.
NOTE: The thermal grease syringe is intended for single use only. Dispose
the syringe after you use it.
3

Werbung

loading