Maintenance And Service; Maintenance And Cleaning; Spare Parts - Bosch BL 200 GC Professional Originalbetriebsanleitung

OBJ_BUCH-78-004.book Page 35 Thursday, July 26, 2007 2:04 PM
Overview of Indications
Switching on the measuring tool (3 s self-check)
Measuring tool levelled in/ready for operation
Levelling in or re-levelling
Self-levelling range exceeded
Out-of-level shutoff activated
Out-of-level shutoff actuated
Automatic levelling switched off
Inclined operation in a single axis is switched on
Stand-by-operation with Storage of the
Operating Mode
Battery voltage low
Battery empty
Malfunction

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Wipe away debris or contamination with a dry,
soft cloth. Do not use cleaning agents or solvents.
Regularly clean the surfaces at the exit opening
of the laser in particular, and pay attention to
any fluff of fibres.
When heavily contaminated, the measuring tool
can be cleaned under running water. Do not im-
merse the measuring tool in water and do not
subject it to a high-pressure water jet.
Bosch Power Tools
2x/1 s 2x/1 s
1x/1 s 1x/1 s 1x/1 s 1x/1 s
1x/4 s
4x/1 s
1x/1 s 1x/1 s
* for line and rotational operation
1x/1 s Flashing frequency (e.g. once per second)
Continuous operation
Function stopped
If the measuring tool should fail despite the care
taken in manufacturing and testing procedures,
repair should be carried out by an authorized af-
ter-sales service centre for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the measuring
tool.

Spare Parts

Rubber foot 14 (3 pce.) . . . . . . . 1 609 203 588
Battery lid 13 . . . . . . . . . . . . . . 1 609 203 M02
Battery pack 15 . . . . . . . . . . . . 1 609 203 M04
English | 35
2x/1 s
1x/1 s
1x/5 s
1x/2 s
1 609 929 L80 | (26.7.07)