3M NANO-LOK 3500224 Benutzeranleitung Seite 14

7.3 LABELING: Figure 14 illustrates Nano-Lok Edge SRL labeling. All labels on the Nano-Lok Edge SRL must be present and
fully legible.
Housing Label (1)
1 Read instructions.
2 One user maximum.
3 Inspect locking action of SRL.
4 Store indoors.
5 Correct way of connecting SRL to harness.
6 Always allow the lifeline to recoil back into the SRL under control.
7 Maximum capacity 141 kg.
8 Temperature usage range -40°C + 60°C
9 May be connected to an anchorage point above, below, or level with
the dorsal D-Ring (141 kg maximum).
10 Do not remove label.
11 Do not repair.
12 Visually inspect unit.
13 Edge certifi ed.
14 Do not place the SRL housing on an edge during use.
Harness Interface Stampings (2)
1 XX = Year Manufactured
2 YY = Heat Lot/Batch Code
14