Lubrication; Cleaning - Tasks To Be Performed; Checks; Storage Of The Machine When Not In Use - Femi N251DA XL Gebrauchs- Und Wartungsanleitung

5.2.

LUBRICATION

NOTE
The machine does not need lubricating.
5.3.

CLEANING - TASKS TO BE PERFORMED

DANGER - WARNING
- WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT (SAFETY GLASSES,
GLOVES AND MASK TO PROTECT THE AIRWAYS).
- AVOID USING JETS OF COMPRESSED AIR.
When necessary:
1. Remove any work residues from around the work area and surfaces using a small brush
or vacuum cleaner.
2. Dismantle and clean the extractor (optional)
Every day:
1. Remove any work residues and dust from the whole machine, including the power cable,
using a vacuum cleaner or a small brush.
Once a week:
1. Disconnect the exhaust fi lter or conduit and thoroughly clean the extractor (optional).
5.4.

CHECKS

Every day:
1. Check that the power cable is in tact.
2. Check that all guards are intact.
3. Check that the tool is intact and shows no signs of wear.
5.5.

STORAGE OF THE MACHINE WHEN NOT IN USE

When the machine is not being used, place it in safety conditions (See GENERAL SAFETY
REGULATIONS).
5.6.

SERVICE

If the intervention of expert personnel is required to perform extraordinary maintenance
operations or repairs, always contact an authorized after sales service.
5.7. DISPOSAL OF THE MACHINE, PACKAGING AND MATERIALS PRODUCED BY
MAINTENANCE OPERATIONS
The machine and its packaging are made from 100% recyclable materials.
The electrical and electronic components (indicated by a crossed out wheelie bin symbol) must
be disposed of in accordance with Directive 2012/19/UE.
EN
35