Main Machine Components (Fig. 1); Machine Description (Fig. 1); Installation; Contents Of The Packaging (Fig. 10) - Femi N251DA XL Gebrauchs- Und Wartungsanleitung

1.9.

MAIN MACHINE COMPONENTS (FIG. 1)

(1) Control handgrip
(2) Blade tensioning handwheel
(3) Blade sliding guide
(4) Machine body
(5) Blade
(6) Motor
(7) Control panel
(8) Main switch
(9) Balancer unit
(10) Swivel support
(11) Cooling circuit pump
(12) Base tank
(13) Pedestal
(14) Clamp drive
(15) Quick locking lever
(16) Clamp

1.10. MACHINE DESCRIPTION (FIG. 1)

The bandsaw is made up of two main parts: the machine body (4) complete with motor (6) and
drive system, which is joined, by means of a swivel support (10), to the bottom section, made
up of a base tank (12) and clamp (16).
The base tank (12), as well as collecting the cutting fl uid also acts as a base unit for connection
to the pedestal (13).

2. INSTALLATION

2.0.

CONTENTS OF THE PACKAGING (Fig. 10)

• 1 bandsaw
• 1 Bar holder
• 1 spray guard
• Fasteners for securing the tank to the pedestal
• Machine assembly tool kit
• User Manual
• Supplementary sheet
2.1.

REMOVING THE PACKAGING

It is advisable to keep the packaging for future use (for transporting or storing the machine).
a. Separate the machine from the delivery pallet by unscrewing the fi xing screws
EN
27