Change The Control Panel Overlay - HP LaserJet 9000n Inbetriebnahme

Step 10 Change the control panel overlay
1
2
3
20 Printer setup
The control panel comes with an English
overlay installed. If necessary, use the
procedure below to change the control
panel overlay to one included in the box.
To change the overlay
1 Locate the power switch on the front
of the printer. Press the power switch
to turn the printer off (button out).
2 Insert your fingernail or a thin, rigid
object in back of the overlay and lift
up.
3 Gently lift the overlay up and
backward to move it away from the
printer.
ENWW