Change The Control Panel Overlays - HP LaserJet 9000mfp Inbetriebnahme

Step 9 Change the control panel overlays
1
2
3
22 Product Setup
The control panel comes either with
English overlays installed or with no
overlays. If necessary, use the procedure
below to change the control panel
overlays.
1 Locate the two control panel
overlays.
2 Insert a small, flat-bladed
screwdriver or other thin, narrow
device in the slot at the top edge of
one of the overlays.
3 Lift the overlay up and backward to
move it away from the product.
ENWW