Klarstein Darya Handbuch Seite 24

EN
24
Installing the Carbon Filter
Note: An activated carbon filter is not included. But you can buy it as an extractor
hood.
1
Activated carbon filter can be used to
trap odours.
Remove the grease filter. Put the new carbon filter back on the grease filter. Attach
the correct carbon filter with the small steel wire. Replace the grease filter including
the activated carbon filter.
Note: Make sure the filter is securely seated. Otherwise, it may come loose and
become a hazard. If the activated carbon filter is connected, the suction power is
reduced.
2
In order to install the activated carbon
filter, the grease filter should be
detached first. Press the lock and pull it
downward.
3