Klarstein Arabica Bedienungsanleitung Seite 20

EN
20
6. Allow the unit to cool down completely after use. Only then remove the sieve holder
by turning it to the left. Remove the used espresso powder from the sieve.
7. Clean the sieve and the sieve holder with water. Clean the appliance surface, drip
tray and drip tray cover with a damp cloth.
Note: Never remove the sieve holder while the unit is in operation.
Changing the preset time for SINGLE and DOUBLE
When switched on, the preset output time for SINGLE (20 seconds) and DOUBLE (40
seconds) can be changed. To do this, proceed as follows:
• After heating, press and hold the SINGLE or DOUBLE button for about 3 seconds
until the pump starts.
• When the desired amount of espresso is reached after a certain time, press the
SINGLE or DOUBLE button again to stop espresso dispensing.
• When you turn the machine off and on again, the machine memory will remember
the desired time (quantity of espresso).