Product Safety Information; Product Specifications - Ingersoll-Rand QA8 Serie Technische Produktdaten

Product Safety Information

Intended Use:
These Air Angle Wrenches and Nut Runners are designed for assembly applications requiring precise torque control, accuracy, consistency, and
repeatability.
• Disconnect the air supply from the tool before adjusting the clutch.
•
If the clutch is adjusted over the maximum power output of the tool, the clutch will not function and the tool will stall.
• If the tool is operated below the recommended air pressure, the clutch at the higher torque settings may not function properly
causing the tool to stall.
•
Use clutch adjustment screwdriver supplied with the tool.
• It is recommended to use a torque reaction bar, flange or fixture for applications where torque is higher than 4 Nm for straight tool
configurations and 10 Nm for pistol tool configurations, and where reaction force on operator is higher than 223 N (50 lbs) for angle
tool configurations.
•
Straight tool configurations must be mounted using approved mounting flange or reaction bar as specified in Parts Information
Manual 16601072.
For additional information refer to Air Angle Wrench Product Safety Information Manual Form 04585006.
Manuals can be downloaded from www.ingersollrandproducts.com

Product Specifications

Style
QA6AA-030
QA6AA-040
QA6 QA6AA-055
QA6AA-070
QA6AA-090
QA8AA-040
Angle, Lever Start QA8AA-055
QA8AA-070
QA8AA-090
QA8
QA8AA-115
QA8AA-150
QA8AA-200
QA8AA-225
QA6AS-025
QA6AS-030
QA6
QA6AS-055
QA8AS-040
Straight, Lever Start QA8AS-055
QA8AS-070
QA8 QA8AS-090
QA8AS-115
QA8AS-150
QA8AS-180
16601064_ed4
Free Speed Clutch Torque Range
Model(s)
rpm
580
430
320
225
185
570
425
320
255
200
145
110
90
720
605
QA6AS040 450
325
600
470
355
255
215
165
140
WARNING
Information given for tool operation at
Stall Torque
Nm Nm
15-30 39
20-40 49
25-55 65
35-70 88
45-90 103
20-40 52
25-55 68
35-70 86
45-90 108
70-115 124
75-150 165
100-200 213
122-225 274
12-25 27
15-30 32
20-40 43
25-55 60
20-40 47
25-55 60
35-70 80
45-90 106
70-115 127
75-150 163
90-180 194
90 psi/6.2 bar
Recommended Operating Max. Torque
Nm
30
40
55
70
90
40
55
70
90
115
150
200
225
25
30
40
55
40
55
70
90
115
150
180
EN
EN-1