Viscount Prestige 100 Kurzanleitung Seite 49

The MAN.II/PEDAL PISTON COMBINE allows the memories of the second manual to be
"coupled" with those of the pedal board. In this way, when a manual II memory is called up, the
same pedal board memory will be activated automatically.
To set these two parameters position the cursor next to the heading on the display and use the
[VALUE] encoder to select enable to turn it on or disable to turn it off.
The status of these two settings is also shown by the [I/II KEYB. INV.] and [II/PD PIST. COMB.]
LEDs on the centre panel (see also par. 2.2).
If you push CURSOR [ ] the display will show the last Keyboards Setting function that allows to
activate or de-activate the Enclosed and Automatic Pedal in the general memories and the Tremulant's
depth and speed in the general and divisional memories.
ENCLOSED, AUTOMATIC PEDAL AND TREMULANT
DEPTH AND SPEED STORED IN MEMORIES:NO
Use the [VALUE] encoder to select either YES to enable memorisation or NO to disable it.
NOTE
If memorisation of the Enclosed and Automatic Pedal settings are enabled, when the Cancel
button ([C]) is pressed under the manuals these two functions will not turn off.
Now press the [EXIT] button to return to the SET-UP menu and to save the settings.
Quick Guide - Viscount Prestige 100
47