Programming - Pentair FLECK 7700 Bedienungsanleitung

5 - PROGRAMMING

1. Press once the
go from one display mode to
another.
2. Set parameters values by
using the and
3. Depending on the
programmation, some
displays will not appear and
some will not be variable.
4. Bold characters default
setting.
23
Set the clock on 12:01 Press simultaneously on the
12:01
button to
buttons for 5 seconds.
1. Display unit (U)
U--2
i.e.: - Gallon
buttons.
2. Regeneration way
i.e.: - downflow
dF
3. Regeneration type (7)
i.e.: - Time clock regeneration
7--3
4. system capacity
Only viewed in metered version
i.e.: - Us format in Kilo grain
C 180
1°tH = 10ppm of CaCO
5. Input water hardness (H)
Only viewed in metered version
H-15
i.e.: - Us Format in grain
6. Regeneration time
2:00
i.e.: - Regeneration at 2 A.M.
7. Indicate the day of the week
dAY3
i.e.: - Day number 3 is Wednesday
8. Regeneration day override
Not viewed in weekly chronometric version
A--7
i.e.: - Regeneration every 7 days
9. Cycle times based on dF
9.1 Backwash
1-10
i.e.: 10 minutes
9.2 Brine draw & slow rinse
2-60
i.e.: 60 minutes
9.3 Second backwash
3--5
i.e.: 5 minutes
9.4 Fast rinse
4-10
i.e.: 10 minutes
9.5 Brine fill
5--12
i.e.: 12 minutes
- Litre
- Downflow brine fill first
- Filter
- Metered immediate regeneration
- Meter delayed regeneration
- Chronometric 7 days
- Metrical format m 3 x°tH
3
- Metrical format (french degrees)
- No overriding
and
[ U - - 1 ]
[ U - - 2 ]
[ d F ]
[ d F F F ]
[ F l t r ]
E
[ 7 - - 1 ]
[ 7 - - 2 ]
N
[ 7 - - 3 ]
[ 7 - - 5 ]
G
L
I
[ C - 2 4 ]
[C 180]
S
H
[ H - 1 5 ]
[ H - 2 5 ]
[ 2 : 0 0 ]
[dAY3]
[ A - - 7 ]
[AOFF]
[ 1 - 1 0 ]
[ 2 - 6 0 ]
[ 3 - - 5 ]
[ 4 - 1 0 ]
[ 5 - 1 2 ]
7700