Removing The Base Cover - Dell Precision M3800 Bedienungsanleitung

Abbildung 2. Vorderansicht
1. Tastatur
3. Handballenstütze

Removing the Base Cover

1. Follow the procedures in Before Working Inside Your Computer.
2. Close the display and turn the computer over.
3. Turn the system badge flap over and place it on the base cover.
4. Remove the screws that secure the base cover to the computer. Release and remove the base cover from the computer.
NOTE: To remove the screws from the base cover, use a T5 Torx screwdriver.
5. Lift up and remove the base cover from the computer.
8 Entfernen und Einbauen von Komponenten
2. Touchpad
4. Anzeige