Dell Precision M3800 Bedienungsanleitung Seite 32

Option
USB PowerShare
USB Wake Support
SATA Operation
Adapter Warnings
Multimedia Key Behaviour
Battery Health
Battery Charge Configuration
Miscellaneous Devices
Table 4. Security
Option
Unlock Setup Status
Admin Password Status
System Password Status
HDD Password Status
Asset Tag
Admin Password
System Password
HDD Password
Password Change
Computrace
32 System-Setup
Description
Enabled (Default Setting)
Allows you to enable or disable the USB PowerShare feature.
Enabled (Default Setting)
This option allows you to enable USB devices to wake the system from Standby.
Disable(Default Setting)
Displays the SATA Operation information.
Allows you to enable or disable the adapter warnings feature.
Function Key (Default Setting)
Displays the battery health information.
Adaptive (Default Setting)
Allows you enable or disable the various on board devices. The options are:
• External USB Ports - Enabled (Default Setting)
• USB Debug - Disabled (Default Setting)
Description
Unlocked (Default Setting)
Displays the status of the admin password.
Default Setting: Not set
Displays the status of the system password.
Default Setting: Not set
Displays the status of the system password.
Default Setting: Not set
Allows you to set the asset tag.
Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive
password.
NOTE: Successful password changes take effect immediately.
NOTE: Deleting the admin password automatically deletes the system password
and the hard drive password.
NOTE: Successful password changes take effect immediately.
Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Allows you to set, change or delete the administrator password.
Allows you to enable or disable permissions to set a System password and a Hard Drive
password when the admin password is set.
Default Setting: Permitted
Allows you to activate or disable the optional Computrace software The options are:
• Deactivate (Default Setting)
• Activate