Om-Gryphon Default Configuration - Datalogic OM-GRYPHON SERIE Kurzanleitung

OM-GRYPHON
UK/US

OM-GRYPHON DEFAULT CONFIGURATION

RS232 DEFAULT SETTINGS
9600 baud, parity disabled, 8 data bits, 1 stop bit, handshaking disabled,
ACK/NACK from Host disabled, FIFO enabled, inter-character delay disabled, 5
sec. rx timeout
PEN DEFAULT SETTINGS
interpret operating mode, minimum output pulse 600 µs, conversion to Code 39,
overflow medium, output level normal, idle level normal, interblock delay disabled
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, num lock unchanged, inter-character and
intercode delay disabled, control character emulation = Ctrl+Shift+Key
DATA FORMAT
No header, terminator: RS232 = CR-LF; WEDGE = ENTER
RADIO PARAMETERS
address stamping disabled, address delimiter disabled, battery type NiMh
15