Gewiss Chorus Easy GW 10 763 Bedienungsanleitung Seite 49

USER INSTRUCTIONS
P09 - Setting the control mode
When the P09 code appears on the screen, set the
thermostat control mode using the
(00 = SLAVE, 01 = STAND ALONE)
For further information, please refer to the Control Mode
paragraph.
If the SLAVE mode has been selected, the programming
phase has been concluded. Press the SET key to return
to normal operation mode.
If the STAND ALONE mode has been selected, move onto
point P10.
P10 - Enabling remote controls
When the P10 code appears on the screen, enable or
disable remote controls using the
(OFF = remote controls disabled, ON = remote
controls enabled)
The symbol on the display indicates that this option is
enabled.
When the remote controls option is enabled it is possible to
remotely set the operation type and mode, for instance
using the EIB Easy GSM remote control unit (GW 90 861).
The programming phase is now complete.
Press the SET key to return to normal operation mode.
49
keys.
keys.
E
N
G
L
I
S
H