Cleaning The Thermal Head - Epson TM-P60II Benutzerhandbuch

English
occurred. The battery must be replaced with a new one.
❏
Turn off the power, wait several seconds, and then turn it on again. If the
error remains, contact a qualified service person.

Cleaning the Thermal Head

CAUTION:
After printing, the thermal head can be very hot. Be careful not to touch it
and to let it cool before you clean it. Do not damage the thermal head by
touching it with your fingers or any hard object.
Turn off the printer, open the paper roll cover, and clean the thermal elements of
the thermal head (G 17) with a cotton swab moistened with an alcohol solvent
(ethanol or IPA).
Epson recommends cleaning the thermal head periodically (generally every
3 months) to maintain print quality.
TM-P60II Specifications
Print method
Print density
Printing direction
Printing width (default)
Print font
Paper
Max. Print speed
Paper feed speed
Line spacing (default)
8 TM-P60II User's Manual
Fonts
Characters per line (60-mm paper width) Font A: 36, Font B: 43, Font C: 54
Character size
(W×H)
Character set
Roll paper width
(default)
Paper thickness
Roll paper core
external diameter
Specified thermal
paper
Thermal line printing
203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per
inch)]
Unidirectional with friction feed
(60-mm paper width) 54 mm {2.13"}, 432 dot positions
(58-mm paper width) 52.5 mm {2.07"}, 420 dot
positions
Font A: 12 × 24, Font B (default): 10 × 24, Font C: 8 × 16
(58-mm paper width) Font A: 35, Font B: 42, Font C: 52
Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0
95 Alphanumeric, 12 International, 128 × 11 Graphic
57.5 ± 0.5 mm {2.26 ± 0.02"}
(59.5 ± 0.5 mm {2.34 ± 0.02"} by removing the spacer
installed)
50 µm ~ 80 µm
(Roll paper) 18 mm {0.71"} minimum
(Continuous label paper) 31.4 mm {1.24"} minimum
Original: Nippon Paper: TF50KS-E (paper width: 58
mm) Kanzaki Specialty Paper: P350 (paper
thickness: 62 µm), P310 (paper thickness: 58 µm),
P300 (paper thickness: 56 µm)
Approximately 100 mm/s {3.94"/s}
(when printing with a fully charged battery at 25°C
{77°F})
100 mm/s {3.94"/s} (continuous paper feed with the
Feed button.)
3.75 mm {0.148"}