Cleaning The Display; Cleaning The Thermal Head - Epson TM-T88V-DT Benutzerhandbuch

Cleaning
Cleaning the Printer Case
Be sure to turn off the printer, and wipe the dirt off the printer case with a dry
cloth or a damp cloth.
CAUTION:
Never clean the product with alcohol, benzine, thinner, or other such solvents.
Doing so may damage or break the parts made of plastic and rubber.

Cleaning the Display

Wipe away the dirt with a cloth that is dry or slightly moistened with ethanol or
isopropyl alcohol.

Cleaning the Thermal Head

CAUTION:
After printing, the thermal head and the frame on its side (indicated in the
circle in Illustration
cool before you clean it.
Do not damage the thermal head by touching it with your fingers or any hard
object.
Turn off the printer, open the roll paper cover, and clean the thermal elements of
the thermal head with a cotton swab moistened with an alcohol solvent (ethanol
or IPA). See Illustration X.
Epson recommends cleaning the thermal head periodically (generally every
3 months) to maintain receipt print quality.
Troubleshooting
No lights on the control panel
Check whether the DC cable and AC cable are correctly connected to the printer
and the power outlet.
Error LED on with no printing
❏
Check whether the roll paper cover is closed. If it is open, close it.
❏
If the Paper LED is on, check whether the roll paper is correctly installed and
any roll paper remains.
Error LED flashing with no printing
❏
Check whether a paper jam has occurred. If the paper is jammed, remove the
jammed paper, referring to "Removing the Jammed Paper" on page 10 and
install the roll paper correctly.
❏
Printing stops if the head overheats and resumes automatically when it cools.
❏
For other cases, turn the printer off, and turn it back on after 10 seconds.
R
) can be very hot. Be careful not to touch it and to let it
TM-T88V-DT User's Manual 11
English