Cleaning The Print Head - Epson TM-H6000III Bedienungsanleitung

English
Troubleshooting
Error LED is on or flashing.
Make sure that the printer cover is properly closed.
Turn off the printer and check for a paper jam.
The autocutter is jammed or the roll paper cover will not open.
1. Turn off the printer and open the unit cover.
2. Then turn the knob until you see a pin in the opening.

Cleaning the Print Head

CAUTION:
After printing, the print head can be very hot. Be careful not to touch it. Also let
it cool before you clean it. Do not damage the print head by touching it with
your fingers or any hard object.
Open the roll paper cover, and clean the thermal element (the green part) of the
print head with a cotton swab moistened with an alcohol solvent (ethanol or IPA).
Clean the thermal head periodically (generally every 3 months) to maintain
receipt print quality.
6 TM-H6000III User's Manual
knob
pin