Operation; Automatic Filter Cleaning - Kärcher SB VC 2 Originalbetriebsanleitung

Operation

Differences between the start-up
control
A SB VC 1
B SB VC 2
1 Vacuum selection button, left
2 Vacuum selection button, right
SB VC 1
Vacuuming starts immediately after a coin
is inserted.
SB VC 2
After inserting a coin, select the corre-
sponding vacuum cleaner station using the
button. Vacuuming starts.
1 Display (optional)
Other versions:
With/without coin slot.

Automatic filter cleaning

The device has an automatic filter dedust-
ing function that is especially effective in re-
moving fine dust. After starting vacuuming,
the flat fold filter is automatically cleaned by
three pulsating bursts of air.
Note: Automatic filter dedusting is switched
on at the factory.
Note: The automatic filter dedusting func-
tion can only be switched on/ off when the
appliance is switched on.
– To switch off automatic filter cleaning:
 Activate the switch. Indicator lamp in
the switch goes off.
– To switch on automatic filter cleaning:
 Press the switch again. Indicator lamp
in the switch glows green.
Note
Switching the automatic filter dedusting
function off leads to premature filter wear
and a reduction in suction power.
– 6
EN 25