Thermalright Archon IB-E X2 Bedienungsanleitung Seite 7

Step 5:
1
Step 5 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw
Nuts. Use the four M3L6 Screws to fix the
Anchoring Mount on to the Screw Nuts.
Step 7:
Step 7 : Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make Mounting Plate go through the Heatsink Body. And
then use the two M3L6 screws to secure the Mounting Plate, one side at a time in several turns to
ensure balanced mounting.
Step 8:
Step 8 : Fan Installation
Place the included TY-141SV fan onto the
Heatsink body. And then secure it with the Fan
Clips, by pulling the Fan Clips to place the four
ends at the four holes on the TY-141SV fan, Now
repeat the same for the second fan on the other
side of the heat-sink.
4
2
3
Step 6:
Step 6 :Applying Thermal Paste
Apply the included Thermal Paste, Chill Factor
III to the base of the Heatsink and the surface
of the CPU evenly. (A flat edge, like a business
card or an old credit card would be beneficial in
spreading the thermal paste.)
Step 9:
Step 9 : Installation completed
Connect the two TY-141SV fans to the PWM
Y-Cable then connect the cable to the CPU PWM
Fan socket on the motherboard. Installation
complete.