Thermalright Archon IB-E X2 Bedienungsanleitung Seite 10

Installation Instructions:
Step 1:
Step 1 : Part Installation
Take out Archon IBE X2 heat-sink body from the brown box. Apply Anti-Vibration Paddings to 4 corners
on both sides of the Heatsink Body. Pull both ends of the Fan clip and make them go through holes on
the corners of the heat-sink. Repeat for the other three fan clips. Leave all four fan clips on the Heatsink
Body for fan install later on. Do not remove them.
Step 2:
Step 3 : Screw Pillar Installation
Screw on the four LGA2011 Type B Screw Pillars into the Heatsink studs on the ILM Assembly Frame
around the processor socket.
Step 3:
Step 2 : Anchoring Mount Installation
Place the Anchoring Mount onto the four LGA2011 Type B Screw Pillars, secure it by tightening it with 4
M3L6 Screws.
7
4
1
3
4
1
3
2
2