Thermalright Archon IB-E X2 Bedienungsanleitung Seite 11

Archon IB-E X2
Step 4:
Step 4 : Applying Thermal Paste
Apply the Thermal Paste to the base of the
Heatsink and the surface of the CPU evenly. (A
flat edge, like a business card or an old credit
card would be beneficial in spreading the thermal
paste.)
Step 6:
Step 6 : Fan Installation
Place the included TY-141SV fan onto the Heatsink body. And then secure it with the Fan Clips, by
pulling the Fan Clips to place the four ends at the four holes on the TY-141SV fan, Now repeat the
same for the second fan on the other side of the heat-sink.
Step 7:
Step 7 : Installation completed
Connect the two TY-141SV fans to the PWM Y-Cable then connect the cable to the CPU PWM Fan
socket on the motherboard. Installation complete.
The Ultimate Cooling Solutions!
Step 5:
Step 5 : Mounting Plate Installation
Place the Heatsink Body on top of the CPU. Make
Mounting Plate go through the Heatsink Body.
And then use the two M3L6 screws to secure the
Mounting Plate, one side at a time in several turns
to ensure balanced mounting.
www.thermalright.com
8