Inhaltsverzeichnis
Werbung
1-2
•
Supports Advanced Configuration Power Interface (ACPI)
•
Supports Desktop Management Interface (DMI)
•
AMI BIOS
12. Internal I/O Connectors
•
1x AGP slot
•
5x PCI slots
•
1x Floppy port supports up to 2.88MB
•
2x Ultra ATA/133/100/66/33 connectors
•
2x Serial ATA 150 connectors
•
2x USB headers
•
2x IEEE 1394 headers
•
1x CD-IN, 1x AUX-IN header
13. Back Panel I/O
•
1x PS/2 Keyboard, 1x PS/2 mouse
•
2x Serial port connectors, 1x Parallel port connector
•
1x S/PDIF Out connector
•
AUDIO1 connector (Rear-Left / Rear-Right, Center/Subwoofer)
•
AUDIO2 connector (Mic-In, Line-In, Front-Left/Front-Right)
•
2x USB, 1x RJ-45 LAN Connector
14. Miscellaneous
•
ATX form factor
•
Hardware Monitoring – including Fan Speed, Voltages, CPU and system temperature
•
Supports Wake Up by LAN, Modem Ring, RTC Alarm, Keyboard and Mouse Power On
•
Supports STR (Suspend to RAM)
•
Onboard debug card design with 7-segment display
15. Order Information
Model
SI7
SI7-G
Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be able
to provide at least a 720mA current capacity. Otherwise, the functions may not work normally.
This motherboard supports the standard bus speeds of 133/100/66MHz that are used by
specific PCI, processor and chipset specifications. Exceeding these standard bus speeds is not
guaranteed due to the specific component specifications.
The Serial ATA controller only supports Ultra DMA/ATA100 or higher hard drive. Do not use
hard drives under this specification, or it won't work.
Specifications and information contained herein are subject to change without notice.
SI7 Series
Features
SATA, 10/100M LAN
SATA, Gigabit LAN
Chapter 1
Werbung
Inhaltsverzeichnis
