Delete All - JVC KD-DB95BT Bedienungsanleitung

4 Press and hold one of the number buttons (1 to 5).
"MEMORY PX" appears when the contact is stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in
2
step and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 5).
3 Press the volume knob to call.
"NO PRESET" appears if there is no contacts stored.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select [RECENT CALL] or [PHONEBOOK], then
press the knob.
3
Turn the volume knob to select a contact or a phone number.
4 Press and hold G T/P.
5 Turn the volume knob to select [DELETE] or [DELETE ALL], then press
the knob.
DELETE: Selected name or phone number in step
DELETE ALL: All names or phone numbers from the selected menu in
2
step is deleted.
6
Turn the volume knob to select [YES] or [NO], then press the knob.
Bluetooth mode settings
1
Press and hold MENU.
2 Turn the volume knob to select [BLUETOOTH], then press the knob.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
PHONE
AUDIO
APPLICATION
DELETE PAIR
PRIORITY
P.BOOK WAIT *
SET PINCODE
(0000)
AUTO CNNCT
3
is deleted.
INITIALIZE
INFORMATION
*
1 JVC Smart Music Control is designed to view JVC car receiver status
and perform simple control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www.jvc.net/cs/car/>.
* 2
Selectable only when the connected phone supports OPP.
Selects the phone or audio device to connect or disconnect.
Shows the connected phone name using the JVC Smart Music Control *
app. " " appears in front of the device name.
1 Turn the volume knob to select a device to delete, then press the
knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
Selects a device to be connected as priority device. " " appears in front
of the device name set as priority.
• "NO PAIR" appears if there is no registered device found.
2
Copies up to 400 numbers from the phonebook memory of a connected
phone.
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
1 2
Repeat steps and until you finish entering the PIN code.
3 Press the volume knob to confirm.
ON: The unit automatically reconnect when the Bluetooth device is
within range. ; OFF: Cancels.
YES: Updates all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
MY BT NAME: Displays the unit name (JVC UNIT). ;
MY ADDRESS: Shows address of this unit.
BLUETOOTH®
Default: XX
1
ENGLISH | 15