Palazzetti BELLA IDRO Verwendung Und Betrieb Seite 29

5.4 PELLET LEVEL
Enabling the "Pellet Level function allows you visualise
a digital bar level indicator which displays the estimated
levels of pellets in the hopper ( g. 4.14 .
The estimation is only valid if the hopper has been previously
lled and the "full status button has been pressed (
A ashing bar followed by a beep indicates that the reserve
level has been reached.
• Press the Menu button (
• Press the key next to the settings symbol ( g. 4.15
• Scroll the menu ( g. 4.16 with "up and "down buttons
( - until you nd: "PELLET LEVEL
• Press the button next to the "set symbol (
On the "Pellet Level settings screen ( g. 4.17 you can:
• Activate or deactivate the function using the arrow
buttons ( -
• Con rm selection using the button next to the "set
symbol (
5.5 BLOCK KEYS
Enabling the Block Keys function allows you to block or
unblock use of the control panel keys, this can be achieved
by pressing ( and (
If this function is disabled then you can't block the control
panel.
• Press the Menu button (
• Press the key next to the settings symbol ( g. 4.15
• Scroll the menu ( g. 4.16 with "up and "down buttons
( - until you nd: "BLOCK KEYS
• Press the button next to the "set symbol (
On the Block Keys screen ( g, 4,18 display you will be
able to:
• Activate or deactivate the function using the arrow
buttons ( -
• Con rm selection using the button next to the "set
symbol (
.
at the same time.
.
29
.
g. 5.15
g. 5.16
g. 5.17
g. 5.18
g. 5.19