Palazzetti BELLA IDRO Verwendung Und Betrieb Seite 24

3.2.3 MANUAL ADJUSTMENT OF FUNCTIONING STOVE
When the stove is operating in automatic mode, that is
to say with an active timer/thermostat, a screen ( g. 3.7
displaying the following information appears:
• Date, time and current temperature
• A chart with the selected temperatures for a given day
• An symbol representing settings adjustment (
• An symbol representing the switch from manual to
automatic mode (
By pressing the relevant "set button (
the temperature using the (
the following hours at intervals of 30 minutes to adjust the
temperature settings ( g. 3.8
Press the "back button (
By pressing the button next to the "hand symbol ( g. 3.7
you can switch (without further con rmation necessary
from automatic (timer mode to manual.
3.3 SHUT-DOWN
The stove is shut-down by holding the "power (
down for a short time. The stove will engage an automatic
shut-down sequence ( g. 3.9 .
Never shut the stove down by disconnecting the power or
by using the power switch of the unit.
If you attempt to switch the stove on in the shutdown phase,
the message "AWAITING CLEANING will appear on the
menu.
you can adjust
button, or scroll through
.
to con rm the settings.
button
24
g. 3.7
g. 3.8
g. 3.9