Palazzetti BELLA IDRO Verwendung Und Betrieb Seite 23

3.2.1
• Press the Menu button (
• Press the key next to the settings symbol ( g. 3.3 -
• Scroll the menu with "up and "down buttons (
until you nd: "SET JOB
• Press the button next to the "set symbol (
• Using the " (
settings and adjust the values accordingly with the arrow
buttons ( - :
• Desired temperature:
– Water (con gurations 1 - 3 - 4
– Room (con guration 2
• Oven (OFF, Light, 50..260°C
• Maximum power (1..5
• Press the "OK button (
3.2.2 MANUAL ADJUSTMENT OF FUNCTIONING STOVE
When the stove is operational a screen appears, displaying
the following:
• The current operational settings
• An symbol displaying the estimated level of pellets in the
hopper ( (if it has been enabled
• An symbol representing the timer (
• The "set symbol (
• Press the button next to the "set symbol (
the settings screen ( g. 3.4
• Using the " (
settings and adjust the values accordingly with the arrow
buttons ( - :
• Desired Water/Room temperature
• Oven (OFF, Light, 50..260°C
• Maximum power (1..5
• Press the "OK button (3 to con rm your choice.
Each time the hopper is lled, you must press the (" g. 3.5
button to reset the level.
• Press the key next to the "clock symbol ( g. 3.5 -
• A further screen ( g. 3.6 will ask you to con rm whether
you want to switch from manual to automatic mode
• Press the "ok button (
choice.
.
button scroll through the operational
to con rm your choice.
button scroll through the operational
if you wish to con rm this
-
Example in con guration 1
Example in con gurations 3-4
to access
23
g. 3.3
g. 3.4
g. 3.4
g. 3.5
g. 3.6