CAME BX Serie Installationsanleitung Seite 43

Memorisation
- Keep the CH1 button on the electronic card pressed. The led fl ashes.
CH1 = Channel for direct
command to a function
of the gearmotor's card,
("open only/"open-close-
invert" or "open-stop-
close-stop" vommand,
depending on the choice
made on DIP switches 2
and 3).
- Press the transmitter button you wish to memorise. The LED will stay on to show memorisation has been successful.
- Repeat the points 1 and 2 procedures "CH2" button associating this to another button on the transmitter.
CH2 = Channel for direct
command an accessory
device connected to
B1-B2.
CH1
T1
LED flashing
CH1
LED on
AF card
CH2
T2