CAME BX Serie Installationsanleitung Seite 41

10 Programmation to save gate-run and decelerations adjustments
Do the adjustment by making the operator execute a complete opening/closing manoeuvre
The control board automatically registers the gate-run adjustments with opening and closing decelerations.
To save the adjustment, position dip 6 in ON and press CH1 button until the signalling led stays on.
Re-position the dip in OFF
Note: you need to reposition the dip in OFF so to avoid that the reactivation of power supply after a blackout provokes a new adjustment
while executing the first manoeuvre.
DIP 6 to ON
CH1
Lit LED
DIP 6 to OFF