Removing/Replacing The Pouring Sieve; Storage; Disposal - Silvercrest KH 1142 Bedienungsanleitung

Removing/replacing the pouring sieve

• Open the lid w .
• Press from the inside against the pouring sieve
and at the same time push it upwards.
• Clean the pouring sieve
dishcloth and under running water.
• After cleaning, insert the pouring sieve
above and press it firmly into place. Ensure that
the bar on the pourer sieve
guide rail.
• Should the scale deposits in the pourer sieve
be firmly settled, lay it in a water-vinegar solution,
with a ratio of 6:1, for a few hours. The scale
deposits will dissolve themselves. Rinse the pourer
sieve q
with lots of clear water.

Storage

Allow the appliance to cool off completely before
putting it into storage.
• Wind the power cable
the bottom of the appliance.
• Store the appliance in a dry place.
q
q
with a lightly moistened
q from
q is gripped in the
q
u
around the holder on

Disposal

Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of the packaging materials in an
environmentally responsible manner.
- 17 -