Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; In The Event Of Scale Deposits; Removing/Replacing The Pouring Sieve; Storage - Silvercrest SWKK 3000 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SWKK 3000 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 39

Cleaning and Care

Danger
Do not open any part of the housing. There are no
operating elements inside. An open housing can create
the risk of a life-threatening electrical shock.
Never submerse any parts of the appliance in
water or other liquids! This can create the risk
of a life-threatening electrical shock if residual
liquid comes into contact with powered
components.
Before cleaning the appliance,...
• first, remove the plug from the power socket and
allow the appliance to cool down completely.
• Clean the exterior surfaces and the power cable
with a slighly damp cloth. Be sure to dry the
appliance well before taking it back into use.
• Never use any cleansers, abbrasive substances
or solvents. These can damage the appliance.

In the event of scale deposits

• Before descaling, remove the spout sieve 7 (see
chapter "Removing/replacing the pourer sieve").
• Take any decalcifying agent used for kitchen
utensils (e.g. decalcifiers for coffee machines)
from a grocery shop. Proceed as detailed in the
instructions provided for the use of the decalcfying
agent.

Removing/replacing the pouring sieve

• Open the lid 1.
• Press the plastic tab down and simultaneously
pull the spout sieve 7 inwards.
• Remove the spout sieve 7.
• Clean the spout sieve 7 with a moistened wash-
cloth under running water.
• After cleaning, place the spout sieve 7 against
the opening on the inside . Ensure that the lower
recess is sitting on the pin inside the kettle. Press
on the spout sieve 7 until it engages.
• Should the scale deposits on the spout sieve 7
be firmly established, place it in a water-vinegar
solution with a ratio of 6:1 for several hours. The
scale deposits will dissolve. Rinse the spout sieve
7 with lots of clean water.

Storage

Allow the appliance to cool off completely before
putting it into storage.
• Wind the power cable around the cable winder 5
under the base 4.
• Store the appliance in a dry place.
- 4 -

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis