Inserting The Battery/Charging - Panasonic RR-XS450 Bedienungsanleitung

Inserting the battery/Charging

Upon purchasing, charge once before initial
use.
Use your computer for charging. If the battery has
completely run out, it takes approx. 2 hours for a full
recharge.
Inserting the rechargeable battery (supplied)
1 AAA rechargeable Ni-MH
battery Make sure the battery
faces the right direction.
Charging the battery
• Start the computer beforehand.
• Turn the unit off beforehand. (➜ page 9)
1
Take out the USB plug.
Push and slide
until a "click"
sound is heard.
Storing the USB plug:
2
Insert the unit's USB plug into the
computer.
Insert the USB plug straight
in the same direction as that
of the terminal.
If the unit cannot be connected to the computer
directly, use the USB extension cable (supplied).
A message is displayed on the screen.
The fi rst time you connect the unit to your
PC
Because multiple "Found New Hardware" messages
will appear, do not disconnect the unit from your PC
until all messages disappear.
Never disconnect the unit or remove the SD
*
card while "ACCESS..." is displayed, otherwise
this unit may be damaged.
USB cover
Firmly insert the USB plug all
the way in. (The USB cover
will not impede insertion as it
is stored inside the unit.)
7
7