Inhaltsverzeichnis
Werbung
Connecting this unit to a computer
You can copy files recorded on this unit to the
computer.
• Start the computer beforehand.
• Turn the unit off beforehand.
1
Take out the unit's USB plug.
Push and slide
until a "click"
sound is heard.
2
Connect the unit to a computer using the USB
port.
Insert the USB plug straight
in the same direction as that
of the terminal.
If the unit cannot be connected to the computer directly,
use the USB extension cable (supplied).
*
Do not use any other USB extension cables except the
supplied one.
Storing the USB plug:
USB cover
Firmly insert the USB plug all
the way in. (The USB cover
will not impede insertion as it
is stored inside the unit.)
Do not use the supplied cable with other devices.
Caution: Use only the supplied USB extension cable
with a ferrite core when connecting to computer.
*
The first time you connect the unit to your PC
Because multiple "Found New Hardware" messages
will appear, do not disconnect the unit from your PC
until all messages disappear.
*
Screen display during connection with PC
During connection
*
This unit cannot be operated while connected to the
computer.
*
When the unit is connected to your PC, it can operate
without the battery, because power is supplied by the
computer.
*
When the unit is connected to the computer, the
computer may not start (restart). It is recommended
that the unit is removed from the computer when
starting (restarting) the computer.
During file transfer
ACCESS...
63
63
Werbung
Inhaltsverzeichnis
