Information; Advanced; Maintain; Failure Reporting - Monacor AHR-40 Bedienungsanleitung

Select one <common user> and click <Apply>, and then enter
into <Authority set> interface shown as fig. 6-49. [Admin] is
authorized to set common user's authority.
Log Search: Allow you check all the system logs.
Parameter: Allow you set all the parameters.
Maintain: Allow you update version, recover ex-factory value,
device reboot and shut down.
Disk Manage: Allow you manage and control the HDDs.
Remote Login: Allow you remote login DVR.
Rotate Control: Allow you sequence live screens for all the
channels.
Manual record: Allow you manually start / stop record.
Backup: Tick-select the option, the user is allowed to backup
the record of all the channels.
Live: Tick-select the option and the user is allowed to view all
the live images for all the channels.
Playback: Tick-select the option and the user is allowed to
playback the record you selected.
PTZ control: Tick-select the option and the user is allowed to
perform the PTZ operation for the selected channel.

6.2.7.3 Information

Click [Main Menu  System  Info] and then enter into the
interface shown as fig. 6-50.
Now user can check the current Device name, Device ID, Device
type, Device S/ N, MAC address, IE version, Software version,
Hardware version etc.
Fig. 6-48
Fig. 6-49
Fig. 6-50

6.2.8 Advanced

6.2.8.1 Maintain

Click [Main menu  Advanced  Maintain] to enter into the
maintain interface shown as fig. 6-51.
Auto Reboot: You can enable the auto maintain function
regularly as per user's need.
System Upgrade: After decompressing update file package, copy
the file named "dvrupgrade" to root directory of U flash disk.
Insert the U flash disk into USB port of DVR. Click <Upgrade>.
Load Default: If [Load Default] is selected, you can initialize
the system to the ex-factory default.
Reboot: Click [Reboot] button to manually restart DVR system.
Shutdown: Click the [Shutdown] button to shutdown the device.
Load Setting: Load the parameters in the U flash disk to
device; after loading successfully, system will auto restart.
Save Setting: Save the parameters of device to a flash disk.
Note:
1. Do not take out the USB memory or break the power during the
update.
2. When the update is done, system will be automatically restarted.
3. Please manually recovery ex-factory default after system rebooting;
4. It will be available only when DVR return back to Preview mode
and no any operation.

6.2.8.2 Failure Reporting

Click [Main menu  Advanced  Event] to enter into the
<Event> interface shown as fig. 6-52.
Event Type: Select the failure type for which the other settings
are to apply:
Disk No Space = HDD full
Disk Error = HDD error
Video loss = video signal loss
Enable: When this option is tick-selected, the respective failure
type will be reported.
Alarm Out: When this option is tick-selected, the alarm sensor
connected to the contacts "Alarm" (27) will sound when the
respective failure type occurs.
Latch time: You can set the duration of the alarm (10 s, 20 s,
40 s, 60 s).
Show Message: When this option is tick-selected, a message
will appear on the screen when the respective failure type occurs.
Buzzer time: You can set if or how long the buzzer shall sound
in the event of an alarm (Off, 10 s, 20 s, 40 s, 60 s).
Send Email: When this option is tick-selected, a message
will be sent to a specific e-mail address when the respective
failure type occurs.
Fig. 6-51
Fig. 6-52
45