Marantz SR-12S1 Bedienungsanleitung Seite 12

¡2 AUTO.SURR (Auto Surround mode)
indicator.
This indicator illuminates to show that the AUTO SURROUND mode is
in use.
¡3 THX SURR EX (THX Surround EX mode)
indicator.
When THX surround EX mode is selected , this indicator lights.
¡4 DTS-ES mode indicators (DISC6.1,
MTX6.1)
These indicators will show to DTS-ES decoding mode.
¡5 PEAK indicator
This indicator is a monitor for an analog audio input signal. If the
selected analog audio input signal is greater than the capable level of
internal processing, this will light. If this happens, you should press the
ATT button.
¡6 SLEEP timer indicator
This indicator lights when the seep timer function in main-room is in
use.
¡7 NIGHT mode indicator
This indicator lights when the SR-12S1 is in the Night mode, which
reduces the dynamic range of digital program material at low volume
levels.
¡8 COPY indicator
This indicator lights when DIGITAL COPY system is active.
¡9 TEST tone indicator
This indicator blinks in generating the test tone in speaker level setup.
™0 DIRECT (Source direct) indicator
This indicator lights when the SR-12S1 is in the SOURCE DIRECT
mode.
9