Unpacking And Content; Unpacking - Erreka PUMA Installateur-Bedienungsanleitung

UNPACKING AND CONTENT

1

UNPACKING

1 Open the package and remove the contents from
within.
}
Discard the packaging in an environmentally
friendly manner, using recycling containers.

Do not leave the packaging within the reach
of children or handicapped people, as it may
cause injury.
2
CONTENT
1 Operator with built-in control panel
2 Anchor plate (base plate)
3 Magnet holder plates with magnets, nuts
and attachment washers
Fig. 2 Content
2 Check the content of the package (see figure
below).

Should it be noticed that a piece is missing or
deteriorated, contact the nearest technical service.
4 Screws and attachment washers to secure
the operator to the base plate
5 Screws to level the operator
6 Release keys
7 Instructions Manual
English
PUMA operator for sliding gates
47