Using Your Camera; Connecting To A Notebook Computer - Sony CMR-PC1 USB Bedienungsanleitung

Using Your Camera

This section describes how to attach your camera to the computer and
how to handle your camera.
Note
• Do not connect or disconnect the camera's USB cable during startup or shut down of
Windows. This could cause your camera or computer to malfunction.
• Do not connect or disconnect the camera's USB cable during startup or shut down of
software used with the camera. This could result in unstable operation of the computer.

Connecting to a Notebook Computer

Attach your camera to the notebook computer, and then connect the
USB cable to the USB connector on the notebook computer.
Extend the arm plate by hand and hook the camera onto the display panel as shown in the
figure below.
You can connect or disconnect your camera to or from the computer
while the computer is powered on. For details on the location of the
USB connector, please see the instruction manual for the notebook
computer.
GB
12
Arm plate