Safety Guidelines - Silvercrest SEMD 12 A2 Bedienungsanleitung

Safety guidelines

RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying a
►
mains power voltage of 220 - 240 V ~ , 50 Hz.
To prevent accidents, have defective plugs and/or power cables
►
replaced immediately by an authorised specialist technician or our
Customer Service department.
In event of operating malfunctions and before cleaning the appliance,
►
remove the power plug from the mains power socket.
Always remove the power cable from the socket by pulling on the
►
plug, not on the power cable itself.
Do not kink or crush the power cable, and route the cable so that it
►
cannot be stepped on or tripped over.
Do not expose the appliance to humidity and do not use it outdoors.
►
If liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a qualified
technician.
Never handle the power cable or the power plug with wet hands.
►
Do not open the appliance motor unit. Doing so can lead to risks and
►
also invalidates the warranty.
Disconnect the appliance from the mains power source immediately
►
after use. The appliance is completely free of electrical power ONLY
when unplugged.
The appliance is for indoor use only.
►
Never immerse the motor unit of the appliance in liquid and do not
allow any liquids to enter the housing of the motor unit.
SEMD 12 A2
GB │ MT │
33 ■