INVENTOR R2-ION8L Bedienungsanleitung Seite 10

7. CONTROL PANEL • FUNCTIONS
POWER
Press "Power" button to turn the dehumidifier on or off.
• After turning the dehumidifier OFF, the fan keeps on spinning, for a small
period of time, so as to protect the inner components. During this operation
DO NOT unplug the device. Please wait for the fan to stop spinning.
• In the event of a power failure the unit has an Auto Restart function. Once
the power is restored after a power failure, the appliance will automatically
restart to operate at the selected settings prior to the power failure.
fan
Press "Fan" button to select the fan speed during its operation.
Select among Low, Medium or High fan speed. The corresponding led indicator will turn
on to show you the status of the fan.
• Use low speed for low noise level or when there is not much condensation.
• Use high speed to achieve faster dehumidification results. .
MODE
Press "MODE" button, and select among the following operations:
Turbo Mode (continuous dehumidification): The dehumidifier will operate continu-
ously, extracting humidity from the air. When this function is selected, the dehumidi-
fier will keep run continuously until the water tank is full, disregarding the relative hu-
midity of the room.
10
EN