Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications - Vigan KR1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
• After using the unit turn it off and unplug it.
• Before disconnecting or changing accessories, switch off the unit.
• Never immerse the motor unit into water or any other liquid.
• Do not push the food into the device with your fingers or other instrument than the designated pusher
included in the box.
• The blades are very sharp. Be very careful during cleaning. Do not reach into the machine when it is turned on.
• Wait until it stops all moving parts before you open the lid or remove the bowl.
• Do not use other parts and accessories than included with the package. Damage caused by using such parts
is not covered by warranty.
• Do not fill the appliance over the maximum capacity, which is indicated on the container and / or in this
manual.
• Before first use, thoroughly wash all parts that come into contact with food.
• After max. four minutes of operation, switch device off and let it cool for five minutes.
• The device should be used only for the purposes described in this manual.
• Remember that if you sell/give the equipment to a third party, you must also give them this manual.
• The manufacturer and distributor assume no liability for failures caused by ignoring safety warnings.
• Do not use both functions of blending, grinding and mixing. Use only one.

TECHNICAL SPECIFICATIONS

Model: KR1
Voltage / frequency: 220-240 V ~ 50 / 60 Hz
Power consumption: P (nom) - 800 W
Mixing container capacity: 5 l
Capacity of glass container: 1.5 liter
Noise: 1m ≤ 85 dB (A)
Short operation (KB): max. 4 min
Product Dimensions: 611 x 231 x 394 mm
Package Dimensions: 585 x 258 x 498 mm
Product Weight: 9.85 kg
Weight including packaging: 11.25 kg
Total pieces in carton: 1
BEFORE FIRST USE
• All components should be carefully cleaned before using. More information in the section
about cleaning.
• Assemble the device according to the relevant section of the manual.
• Pull required cable length from the base and plug the power cord to the power supply socket.
26
str
ATTENTION! RISK OF ELECTRIC SHOCK. BEFORE
OPENING THE COVER, DISCONNECT THE UNIT FROM
THE WALL SOCKET. THE DEVICE CONTAINS NO
PARTS THAT CAN BE REPAIRED BY THE USER, LET
A PROFESSIONAL SERVICE REPAIR YOUR PRODUCT.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis