Safety Precautions During Operation - Contractor BRS-3 Bedienungsanleitung

9. Equipment must be earthed. Provide short-circuit protection. The starting knife switch
must be in the immediate vicinity of the equipment and protect against unauthorised
start-up.

1.4 Safety precautions during operation.

1. Ensure that hoses correspond to the equipment in terms of nominal diameter and working
pressure. Check the attachment of every hose coupling before start-up. An insecurely fas-
tened hose may cause serious injury.
2. Never turn on equipment if you suspect the presence of highly fl impurities in the air!
3. The operator remotely controlling equipment must ensure that no installation or other
work is being performed with the equipment at that moment! An information plate must
be affi ed to the equipment in relation to this: 'ATTENTION: this machine is being controlled
remotely and may start operating without warning!'
4. An operator is not allowed to operate equipment if the operator is fatigued, in a state of
intoxication from alcohol, drugs or medicine that reduces the body's reaction time.
5. The equipment must not be operated if parts of the casing have been removed. Doors or
panels may be opened for short durations for inspection and scheduled checks. It is advis-
able to wear hearing protection.
6
The user bears full responsibility for compliance with the operating
condi- tions of the electrical motor installed in the equipment.
Equipment must be used with protection devices. The protection
devices must protect the electric motor from short circuits,
overloading (systematic and start-up) and open-phase conditions.
Installation of protection devices is the responsibility of the user.
The user is solely liable for injuries or damages which occur due to
non-compliance with safety guidelines during installation, opera- tion
or servicing, as well as unauthorised use of equipment!
In some types of equipment, open doors or removal of panels du- ring
operation may lead to overheating.
CONTRACOR Version 1.2
®