Pausing And Terminating Abrasive Blasting - Contractor BRS-3 Bedienungsanleitung

4.4 Pausing and terminating abrasive blasting.

In order to pause the blast cleaning process, the button on the remote-control handle simply
needs to be released.
In order to terminate the blast cleaning process, carry out the following actions:
1. Release the button on the remote-control handle.
2. Press the OFF button on the electric box panel in order to switch off the vacuum pump.
3. Turn off the supply of compressed air to the pneumatic unit.
4. Empty the dust collector.
CONTRACOR® BRS series. Dust-free abrasive blast cleaning machine
19