Pneumatic Diagram - Contractor BRS-3 Bedienungsanleitung

The machine's inlet pipe has to be connected to the compressed-air line using a flexible hose
with a minimum internal diameter of 1" (I.D = 1"). Using a hose which has a smaller diameter
may diminish the effectiveness of the abrasive blasting.

3.5 Pneumatic diagram.

Reference signs:
1 control pneumatic unit
1a moisture separator filter
1b collector
1c proportioning valve
2, 7 pressure regulators
3, 6, 8 manometers
4 remote-control handle
14
Exceeding the permissible pressure may lead to operator injury
and equipment damage. The user is liable for any consequences of
exceeding the pressure value indicated in this manual.
5 solenoid safety valve
9 pressure vessel
10 solenoid pulse cut-off valve
11 filter of filter chamber
12 blast machine
13 discharge valve
14 blast nozzle
CONTRACOR
Fig. 3.5.
Version 1.2
®