Pioneer PDA-5003 Bedienungsanleitung Seite 77

6
Press the SET button.
The setting is stored in memory and the screen
returns to that shown in step 4.
7
When a component other than a computer is
connected, use the 5/∞ buttons to select [COLOR
DECODING] (INPUT1 or INPUT5).
M E N U
P I C T U R E S C R E E N
C O L O R T E M P.
A U T O P O W E R O F F
D N R
M P E G N R
C T I
P U R E C I N E M A
C O L O R D E C O D I N G
C O L O R S Y S T E M
S I G N A L F O R M AT
SET CHANGE
8
Press the SET button repeatedly to select the
input signal format.
Selection will change as follows each time the SET
button is pressed:
3 RGB
COMP.2 2
The table below shows what settings are appropriate
and available for the type of connections made.
Set [COLOR DECODING] as follows.
Please take care when making settings. Incorrect settings
can adversely affect the Plasma Display.
SETUP
Connected
component
Component video output COMP.1
of a DVD player, etc.
Component video output COMP.2
of digital tuner, etc.
RGB video output of a RGB
video deck etc., with RGB
output
DVI video output of an AV RGB
component with DVI
output port
RGB video output of a PC Not supported
I N P U T 1
S E T U P O P T I O N
: M I D D L E
: D I S A B L E
: M I D D L E
: L O W
: O N
: O F F
: R G B
: A U T O
MENU EXIT
3 COMP.1
COLOR DECODING
9
When the setup is completed, press MENU to exit
the menu screen.
Note
Set [SIGNAL FORMAT] and [COLOR DECODING] for each
applicable input (INPUT1, INPUT2 or INPUT5).
System Settings
21
En