Audio Connections - Pioneer PDA-5003 Bedienungsanleitung

Audio connections

Before making connections, be sure to check that the
audio component's power and the display's main power is
off.
Connect an audio component to the audio input
jack of the Plasma Display with installed video
card.
When the video card is installed, the Plasma Display
provides four or five audio input jacks and one audio
output jack. Consult the following chart to choose the
proper audio input for each video input.
Video
Audio input
input
INPUT1 Stereo mini jack (L/R)
INPUT2 Stereo mini jack (L/R)
INPUT5 Pin jacks (L/R)
*1
INPUT3 Pin jacks (L/R)
*1
INPUT4 Pin jacks (L/R)
*1
When using the PDA-5003, the INPUT3 and INPUT4
audio input connectors are shared.
Audio connection for component connected to
INPUT1
OUTPUT INPUT1 INPUT2
AUDIO AUDIO AUDIO
A stereo miniplug cable can be used to connect the audio
output from the component connected to INPUT1, to the
Plasma Display's AUDIO (INPUT1) jack (L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals according
to the video input selection.
Sound output
Sound of the selected video
input is output from the
• SPEAKER (L/R) terminals
• Stereo mini jack (L/R).
Installation and Connections
Audio connections for component connected to
INPUT2
OUTPUT INPUT1 INPUT2
AUDIO AUDIO AUDIO
A stereo miniplug cable can be used to connect the audio
output from the component connected to INPUT2, to the
Plasma Display's AUDIO (INPUT2) jack (L/R).
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals according
to the video input selection.
Audio connection for component connected to
INPUT5
INPUT5
AUDIO
R L
The audio line for the component connected to INPUT5
can be connected to the AUDIO R/L (INPUT5) pin jacks.
Sound is output from both the AUDIO (OUTPUT) stereo
mini jack (L/R) and the SPEAKER (L/R) terminals according
to the video input selection.
15
En