Tempco RF Bedienungsanleitung Seite 11

g) If you have another MASTER-RF in your installation, repeat
the steps "a)" to "d)".
h) For the RF configuration between the 2
and the Main zone programmer select the line "Master B" or
"Master C". And repeat the step "e)" to "f)"
The main zone programmer can only manage zone(s) on one
unit (Master or One zone).
The link with other Master/receiver devices will be used only
for zone supervising and control.
The device already linked with your main zone programmer will be
framed in green.
Your installation is now ready to work,
nd
or 3
11
rd
MASTER-RF