Power Management Setup; Power Switch - MAXDATA 700T Benutzerhandbuch

Model 400M & 700T User's Manual

11.6 Power Management Setup

You will be greeted by this screen when you enter the Power Management Setup
Menu:

Power Switch

Power Management Under AC Power Off
Power Saving Level
Hard Disk Time-out
Video Time-out
Standby Time-out
Auto Suspend Time-out
LCD Suspend
Suspend Option
Auto Save To File
Wake Up Alarm
Resume Alarm Time
Power Switch:
There are two options to this field: Power Button, and Sleep Button. This field is for
programming the Power Switch (see Chapter 2.6 and then Chapter 2.2). If this field is set to
Power Button, the Power Switch would behave as a normal power On/Off button. If this
field is set to Sleep Button, there are four scenarios:
•
If the Power Switch is pressed continuously for 4 seconds or more, the system would
power off.
•
If the Power Switch is pressed for less than 4 seconds, the Suspend Option is set to
Suspend (also referred to as STR), and when system is operating: system would perform
Suspend-To-RAM; whereby system can be woke up by Power Switch. This scenario is
applicable only to WinNT's and Win98's APM mode.
•
If the Power Switch is pressed for less than 4 seconds, the Suspend Option is set to
STF, and when system is operating: system would perform Suspend-To-File (STF) or
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C)2000 American Megatrends, Inc. All Rights Reserved
Power Button
Off
Off
Off
Off
Off
Disabled
Suspend
Disabled
Disabled
Off
Information in this document is subject to change without notice!!!
Configuring Your System
Use 'Power Button' to power the
system On or Off. Use 'Sleep Button'
to enter or resume from suspend mode.
ESC: Exit ↑↓: Sel
PgUp/PgDn: Modify
F3/F4: Color
Page 11-9