RAIS/attika Q-Tee II GAS Bedienungsanleitung Seite 55

Dansk
MYFIRE APP SETUP
NOTICE
For myfire App setup, you will need your Wi-Fi Net-
work SSID and password
***For more detailed setup/operating instructions
refer to wwwmyfireappcom***
INITAIL SETUP
1 Download myfire App from Apple App Store or
Google Play Store
2 Touch screen to start App setup
3 Choose language, temperature (C° or F°) and
time format (12 or 24 hour)
REGISTRATION
NOTE: You must register before logging in Registrati-
on is one time only
1 Fill in data and accept the "privacy Policy"
2 Touch "OK" in pop-up notice
3 Touch link to confirm email verification
4 You will be shown a message that you have
successfully registered the myfire App
5 Return to App
LOGIN
1 Fill in your registration password
2 Accept "Terms and Conditions"
3 Touch the "Login" button
CONNECT SMART DEVICE TO NEW MYFIRE WI-FI
BOX
1 Touch the icon
2 A message will tell you to go to your smart
device Wi-Fi settings
3 Touch myfire_Wifi-Box_<number>
4 Enter the password "MYFIREPLACE"
CONNECT MYFIRE WI-FI BOX TO WI-FI ROUTER
NOTE: The connecting process may take between
1-10 minutes After successful connection a pop-up
will tell you to go to your smart device Wi-Fi settings
1 Select a name for your fire
2 Type in the name (SSID) of your Wi-Fi Router
3 Type in the password of your Wi-Fi Router
4 Touch "Connect" button
NOTICE
To connect myfire Wi-Fi Box to Wi-Fi Router (Home
Network), make sure:
• Home Network is available
• Home Network name and password are correct
• SSID of the Wi-Fi Router is not hidden
• Home Network signal is in range
• Wi-Fi Router supports User Datagram Protocol
(UDP)
CONNECT SMART DEVICE TO WI-FI ROUTER
NOTE: After successful connection a pop-up will tell
you to go to your smart device Wi-Fi settings
1 Touch "OK" button, if correct
attika
RAIS/ - brugermanual til Q-Tee II Gas / Q-Tee II C GAS
CONFIRM FIREPLACE SETTINGS
1 After confirming fireplace settings touch
"Finish" button
A LIST OF CONNECTED MYFIRE WI-FI BOXES IS
DISPLAYED
1 Touch "Start App" button to finish installation
and setup process
The home screen is displayed and the myfire app is
ready to go
NOTICE
After setting up the myfire Wi-Fi Box and myfire App,
the time has to be synchronized in the settings of the
myfire App
NOTICE
The active device (Symax handset or smart device)
is the one last used An exception is if the non-ac-
tive devise is used to change Light, Fan or AUX
The non-active device will make the changes, but
the active device remains so if it is in Thermostatic,
Program, or Eco Mode If a Profile includes a Ther-
mostatic Program, or Eco setting it will also cause the
active device to remain active
NOTICE
If Thermostatic, Program, or Eco Mode is activated
using the app, the corresponding icon an "APP" is
displayed on the handset (see figure 25)
Figure 25: App connected (In Thermostatic Mode)
NOTICE
During motor movement no information between
receiver and transmitter is exchanged The synchroni-
zation follows after motor has stopped
NOTICE
The room temperature data is transferred by the
Handset during synchronization
55